Hydraulic Valve Testing Stand

It applied to host and hydraulic devices detachable Under the various hydraulic machinery.

Hydraulic stations and working principle

Hydraulic Pump Station also known as Station, is an independent hydraulic devices, according to drive it (host) asked the oil supply and control the oil flow in the direction, pressure and flow, it applied to host and hydraulic devices detachable Under the various hydraulic machinery. User after purchase as long as the hydraulic station and will host the implementing agencies (and the fuel tank of motor oil) connected with tubing, hydraulic machinery to achieve the various provisions of the action, the working cycle.    Hydraulic Pump Station by the devices, integrated block valve or combination of components from the fuel tank electrical box. Components are as follows function:Pump device----Is equipped with motors and pumps, hydraulic station it is the power source, the mechanical energy into hydraulic oil can be the driving force.Manifold----By the hydraulic valve and the passage of a combination of. Hydraulic oil implementation of its direction, pressure and flow regulation.Valve components----Plate valve is installed in the Legislative board, after the board of connectivity, and integrated block the same function.Fuel tank----Welded steel plate is a semi-closed containers, also equipped with Lvyou network, air filter, it used to oil, oil cooling and filtration.Electrical box----The two forms. A set of external lead terminal plate; One is the installation of full control of electrical appliances.    Hydraulic station following the principle of:Rotary motor driven pumps, pump the fuel pumps in the oil-absorption after Dayou, the mechanical energy into the hydraulic oil pressure can, hydraulic oil through the integrated block (or valve combination) dividend hydraulic valve to achieve the direction, pressure, flow, after adjustment Road to take over the transmission of hydraulic machinery or the fuel tank of motor oil and thus control the direction of the transformation of motivation, strength and speed of the size of the speed, and promote all kinds of hydraulic machinery Work.

The structure forms and technical parameters of the hydraulic station:

Commonly we distinguish the structure forms of the hydraulic station from the installation position or cooling ways of pump device. 1 Pump on the tank cover: The pump device is installed on the tank cover with vertical type.2 The pump device is installed at the tank cover with horizontal type.3 The pump device is installed beside the oil tank, so it is easy to install another one and control the oil flow rate.Also we can distinguish it by cooling ways.1 Natural cooling: Cool the tank by exchanging its heat with air.2 Forced cooling: To low down the temperature by the forced cooler, is generally used on the systems of oil tank’s size which is bigger than 250L and power of the motor which is over 7.5kw.There are 18 different sizes of oil tank, as follows: Tank Size(L) 25 40 63 100 160 250 400 630 800 1000 1250 1600 2000 2500 3200 4000 5000 6000 According to your requests or the working conditions of the operating mode, we can make the system:1 Be with integrated block, or not.2 Be assembled with cooler, heater or accumulator.3 Be assembled with Electrical Control Device or not. Classification Displacement MotorKN Pressure Volume Decibel 30T 0.8L/min 0-75 0-40mpa 10L 40dB 60T 1.0L/min 0-75 0-40mpa 10L 40dB 200T 1.5L/min 1.5 0-40mpa 12L 50dB All-purpose 0.8-2.2L/min 0.5-1.5 0-40mpa 6L/12L 40dB The technical parameters above is for reference only

Hydraulic Valve Testing Stand